48V 50Ahr Lithium LiFePo Battery(100A surge)



New Super-Strength 100A surge  lithium battery for  solar applications requiring high surge current.  Ideal for inverters with large input capacitors or inverters that need to be able to power inductive pumps, with high startup current needs.

This bank is ready to be cable-connected to your solar system for battery backup or off-grid configurations. It is constructed of sixteen  50Ahr LiFePo cells, arranged in string  to create a full 2.5kWhr 48V battery.

Internal BMS protects against charging at cold temperatures,  most common limitation of lithium batteries.

Up to 4  batteries can be connected in parallel for larger system needs.

Battery Enclosure IP-65 ABS case for weather resistance.  Note if used in cold environments, a battery enclosure is needed to prevent charging at freezing temperatures

Active cell charge management is built into this system, ensuring long lifetime and protection against overcharging. The BMS will allow 100A of surge current for 4 seconds before initiating a shutdown.

Dimensions are 20.4″x 10.6″ x 8.7″; weight 45.8lbs.

Charge with constant current & constant voltage, no float or trickle charge.

Charge current 10-25A, Max 50A

Max discharge 50A sustained, 100A surge for 3 minutes.

Bulk and absorb voltage: 56V

To determine battery size requirements for your load check out   http://solarpowercalc.com

Ideal for Trolling Motors, Solar Power Backup, UPS, Portable Devices, Medical Cart Applications, Camping, Trailers, Boats, and most deep cycle applications.

NOT RECOMMENDED for engine start applications.

Additional information

Weight 62 lbs
Dimensions 24 × 12 × 12 in

You may also like…

Schneider Conext Inverter, 6800W, Grid+Batt


Cable, 2/0, 48″ long, 3/8″ lugs, Black


Cable, 2/0, 48″ long, 3/8″ lugs, Red