Low Cost Solar, 4 Module Low Profile Support Structure



This is a support structure only. Low Profile support structure for Solar-To-Go  solar array for simple pick-and-place installation.  This system can accept two solar modules, of either 60 or 72 cell format(modules not included). Distance between leg foundations is 8 feet. Two slope positions solar modules to capture morning and afternoon sunlight.

Solar To Go 2 and 4 module arrays
Rack-2 and Rack-4  structures

This Solar-To-Go Rack system can  expanded by adding additional sections. Additional  structures can be attached to existing sections with a slip-and-screw fitting method.

Solar-To-Go arrays joined with spice bar
Solar-To-Go Rack-4 can be joined to other Solar-to-Go structures

Rack can be protected against wind uplift and theft by use of SunnyCal Ground Screws. A simple impact tool can provide more than 300lbs of hold-down strength.

Solar Ground Screw
Optional Ground Screws Secure Against Uplift

The sections can be held in place by SunnyCal ground screws for rapid installation.

Shipping Container Leg Foundation
Shipping Container Leg Foundation for GroundRack

Rack can be bolted directly to shipping container rooftop edges using  angle leg foundations (specified at with order.)

Solar is made simple by:

  • Rack can be preassembled for will call, or bundled in shortened format for shipping. (Sections can be transported using normal pickup or trailer)
  • Can be specified to have leg foundations for  surface resting  or shipping container attachment
  • Hold down can by ballasted weights, rebar-nails, concrete attachment or ground screws
  • System can be expanded by adding additional sections, joined together by link tubes
  • Engineering calculations available(optional)
  • Optional Home-Grid inverter can be included.  Inverters can offset 2000W of household load (assuming 550W modules)
4 input 2kW Home Grid Inverter
4 input 2kW Home Grid Inverter

Note, if home consumption  is less than solar generation, local utility may require net metering agreement due to excess energy back feed.

Select in-store pickup at checkout and call if delivery is required.

Additional information

Weight 60 lbs
Dimensions 48 × 48 × 24 in

You may also like…

Clamp Bracket, 2″ square tube using 18″ Ground Screw


Anchor, Ground Screw, 18″