Low Profile 2 slope Solar Support Structure

$699.00

Description

Low Profile support structure for Solar-To-Go  solar array for simple pick-and-place installation.  This system can accept two solar modules, of either 60 or 72 cell format(modules not included). This is a support structure containing support legs and ground tube only; rails, clamps and modules are optional.

Solar To Go 2 and 4 module arrays
Solar-To-Go 2 and 4 module arrays

Distance between legs is 8 feet. Two slope positions solar modules to capture morning and afternoon sunlight.

Concealed Solar Clamps
Concealed Solar Clamps

For simple assembly, SunnyCal Sola-Clamps (patent pending) can be used to attach modules directly to the supports. These clamps work with virtually any solar module, regardless of thickness or dimensions. They attached using self-drilling screws.

 

 

This Solar-To-Go Rack system can  expanded by adding additional sections. Additional  structures can be attached to existing sections with a slip-and-screw fitting method.

Low Profile Solar-To-Go structure can be easily moved by two persons.
Low Profile Solar-To-Go structure can be easily moved by two persons.
Solar-To-Go arrays joined with spice bar
Solar-To-Go Rack-4 can be joined to other Solar-to-Go structures

Rack can be protected against wind uplift and theft by use of SunnyCal Ground Screws. A simple impact tool can provide more than 300lbs of hold-down strength.

Solar Ground Screw
Optional Ground Screws Secure Against Uplift

The sections can be held in place by SunnyCal ground screws for rapid installation.

Ballast block for Solar-to-go
Ballast block for Solar-to-go

Alternatively, cinder blocks can be used as ballast to prevent wind uplift.

Shipping Container Leg Foundation
Shipping Container Leg Foundation for GroundRack

 

 

 

 

Rack can be bolted directly to shipping container rooftop edges using  angle leg foundations (specified at with order.)

Solar is made simple by:

  • Rack can be preassembled for will call, or bundled in shortened format for shipping. (Sections can be transported using normal pickup or trailer)
  • Can be specified to have leg foundations for  surface resting  or shipping container attachment
  • Hold down can by ballast blocks, rebar-nails, concrete attachment or ground screws
  • System can be expanded by adding additional sections, joined together by link tubes
  • Engineering calculations available(optional)
  • Optional Home-Grid inverter can be included.  Inverters can offset 2000W of household load (assuming 550W modules)
4 input 2kW Home Grid Inverter
4 input 2kW Home Grid Inverter

Note, if home consumption  is less than solar generation, local utility may require net metering agreement due to excess energy back feed.

Select in-store pickup at checkout and call if delivery is required.

Additional information

Weight 60 lbs
Dimensions 48 × 48 × 24 in

You may also like…

Anchor, Ground Screw, 18″

$54.99

Clamp Bracket, 2″ square tube using 18″ Ground Screw

$22.50