Solar-To-Go 2.2kW Home Grid Solar System



Complete 2.2kW home grid connected system to reduce your electric bill using four  550W solar modules. Width of support legs: 96″

The Solar-To-Go system can  expanded by adding additional sections. Additional  structures can be attached to existing sections with a slip-and-screw fitting method.  Structure can be  held in place weighted cinder blocks or SunnyCal ground screws for rapid installation.

Array structure can be bolted directly to shipping container rooftop edges using  angle leg foundations (specified at with order.)

This system will typically produce $190 of utility savings during summer months (assuming $0.40/kwhr utility rate)

Solar is made simple by:

  • Modules and Inverter are preassembled
  • Each section is prewired, with plug-n-play connectors
  • Sections can be transported using normal pickup or trailer
  • Hold down using two  ground screws(optional)
  • Simple 240Vac wiring ties into on-site breaker panel(like a clothes dryer).
  • System can be expanded by adding additional sections
  • Engineering calculations available(optional)

Systems that produce more energy than needed ma require  participation in net metering with utility.

Select in-store pickup at checkout and call if delivery is required.

Additional information

Weight 500 lbs
Dimensions 80 × 48 × 48 in

You may also like…

Clamp Bracket, 2″ square tube using 18″ Ground Screw


Anchor, Ground Screw, 18″