Support structure for Solar-T-Go  solar array for simple pick-and-place installation.  This system can accept eight solar modules, of either 60 or 72 cell format(modules not included). Distance between leg foundations is 8 feet.

Solar-To-Go GroundRack
Example of simple Solar-To-Go frame with two modules installed

This Solar-To-Go GroundRack system can  expanded by adding additional sections. Additional  structures can be attached to existing sections with a slip-and-screw fitting method.

Solar-To-Go arrays joined with spice bar
Solar-To-Go arrays joined with spice bar


GroundRack can be protected against wind uplift and theft by use of SunnyCal Ground Screws. A simple impact tool can provide more than 300lbs of hold-down strength.

Solar Ground Screw
Ground Screws Secure Against Uplift

The sections can be held in place by SunnyCal ground screws for rapid installation.

Shipping Container Leg Foundation
Shipping Container Leg Foundation for GroundRack

GroundRack can be bolted directly to shipping container rooftop edges using  angle leg foundations (specified at with order.)

Solar is made simple by:

  • GroundRack is preassembled
  • Can be specified to have leg foundations for  surface resting  or shipping container attachment
  • Sections can be transported using normal pickup or trailer
  • Hold down can be made by rebar-nails, concrete attachment or ground screws
  • System can be expanded by adding additional sections
  • Engineering calculations available(optional)

Select in-store pickup at checkout and call if delivery is required.

Additional information

Weight 114 lbs
Dimensions 48 × 48 × 24 in

You may also like…

Anchor, Ground Screw, 18″


Clamp Bracket, 2″ square tube using 18″ Ground Screw