Solar Support for 20ft shipping container, two directions



Support structure for  for installation on 20 ft CONEX shipping container. Modules face two directions   This system can accept six-twelve  solar modules, of either 60 or 72 cell format (modules not included). Distance between leg foundations is 8 ft.  Four rafter structures are included for installation on 6ft intervals, with 12-inch overhang at array end.  Centerline of container should align north-south in order to have best performing  east and west facing solar arrays.

For 40ft containers, order two 20ft kits in order to achieve sufficient protection against wind uplift.  Readjust leg placement for equal spacing.

Solar Support Structure for 20ft Conex Shipping Container
Solar Support Structure for 20ft Conex Shipping Container
Shipping Container Leg Foundation
Shipping Container Leg Foundation for GroundRack

3-Inch Prosolar rails are included; mid clamps and end clamps must be ordered separately.  Ground lugs are recommended for each rail segment.

Leg supports can be bolted directly to shipping container rooftop side edges to minimize roof leaks.




Solar Support Facing Two Directions
Shipping Container Structure with Modules Facing Two Directions(shown with square tube feet option)

Additional information

Weight 140 lbs
Dimensions 60 × 48 × 18 in

You may also like…

Grounding lug for solar equipment

Ground Lug


End Clamp, 35mm modules, Black, ProSolar


Mid clamp, 32.8-41mm modules, Silver, ProSolar