Description
Solar-To-Go single-module solar frame for use with single solar module.
This galvanized steel structure can accept any solar module, of either 60 or 72 cell format(module not included). Distance between high and low side is 4 feet. Single slope positions solar modules to capture full daytime sunlight.
Frame includes 4 solar module clamps to secure modules to frame members.
Components are slip-inserted together. Optionally set screws can be installed using a standard user supplied battery-powered impact gun and standard nut-driver tip.
For expansion, this Solar-To-Go Rack system can coupled together by adding linking bars to neighboring supports.
For simple assembly, SunnyCal Sola-Clamps(patent pending) can be used to mount solar panels directly to the support legs. These optional clamps work with virtually any size solar module.
Clamps attach using self-drilling screws.
Rack can be protected against wind uplift and theft by use of SunnyCal Ground Screws. A simple impact tool can provide more than 300lbs of hold-down strength.
The sections can be held in place by SunnyCal ground screws for rapid installation.
Alternatively, cinder blocks can be used as ballast to prevent wind uplift.
Solar is made simple by:
- Rack can be preassembled for will-call (sections can be transported using normal pickup or trailer). Segments can be shortened for shipping; splices are provided for insertion during assembly.
- Hold down can by ballast blocks, rebar-nails, concrete attachment or ground screws
- System can be expanded by adding additional sections, joined together by link tubes
Select in-store pickup at checkout and call if delivery is required.
This is a support structure only, optional module is shown for illustration only .
