Description
Complete assembled solar system for simple pick-and-place installation. This system includes two used 550W solar modules, a Rack support frame and a 1000W solar home-grid inverter to immediately cancel energy consumption before it is recorded by utility meter.
![4 input 2kW Home Grid Inverter](https://sunnycalsolar.com/wp-content/uploads/2024/06/4input-microinverter-300x225.png)
The solar system can expanded by adding additional sections. Additional structures can be attached to existing sections with a slip-and-screw fitting method. The sections can be held in place by SunnyCal ground screws for rapid installation.
![Shipping Container Leg Foundation](https://sunnycalsolar.com/wp-content/uploads/2021/08/Container-Leg-Foundation-1a--300x295.png)
GroundRack can be bolted directly to shipping container rooftop edges using angle leg foundations (specified at with order.)
This system will typically produce $120 of utility savings during summer months (assuming $0.40/kwhr utility rate)
Solar is made simple by:
- Modules and GroundRack are preassembled for will-call pickup
- Each section is prewired, with plug-n-play connectors
- Sections can be transported using normal pickup or trailer
- Hold down can be made by ballast weights, rebar-nails, concrete attachment or ground screws
- Simple 240Vac wiring ties into on-site breaker panel(like a clothes dryer).
- System can be expanded by adding additional sections
- Engineering calculations available(optional)
- Output power cord connection
![Solar-to-go cord connector](https://sunnycalsolar.com/wp-content/uploads/2022/05/Cord-Connector-1b-300x251.jpg)
Solar systems that are grid-tied to enable participation in net metering may require additional documentation and inspections.
Select in-store pickup at checkout and call if delivery is required.