Low Cost Solar-To-Go, 2000W Solar Sys, Array + Structure + Inverter

$2,899.00

Description

Complete assembled solar system for simple pick-and-place installation.  This system includes four 550W solar modules, a Rack support frame and a 2000W 4-pv input solar home-grid inverter to immediately cancel energy consumption before it is recorded by utility meter.

Inverter output comes prewired with 120v plug(20A breaker min), but will auto-adjust  if connected to 240vac, still delivering the full output power.**

Solar-To-Go Home Grid Inverter
Solar-To-Go Home Grid Inverter Mounted on Solar Array

The solar array can  expanded by adding additional sections. Additional  structures can be attached to existing sections with a slip-and-screw fitting method.  The sections can be held in place by SunnyCal ground screws for rapid installation.

This system will typically produce $120 of utility savings during summer months (assuming $0.40/kwhr utility rate)

Solar is made simple by:

  • Modules and GroundRack are preassembled for will-call pickup
  • Each section is prewired, with plug-n-play connectors
  • Sections can be transported using normal pickup or trailer
  • Hold down can be made by ballast weights, rebar-nails, concrete attachment or ground screws
  • Simple wiring ties into simple receptacle or circuit breaker
  • System can be expanded by adding additional sections
  • Engineering calculations available(optional)
  • Output power cord connection

Solar systems that are grid-tied to enable  participation in net metering may require additional documentation and inspections.

Select in-store pickup at checkout and call if delivery is required.

** If UL listing is required, inverter output is 240vac only

Additional information

Weight 70 lbs
Dimensions 48 × 48 × 24 in

You may also like…

Clamp Bracket, 2″ square tube using 18″ Ground Screw

$22.50

Anchor, Ground Screw, 18″

$54.99