Low Cost Solar, Single Module Support Structure, Low Profile

$599.00

Description

This is a support structure only, optional module  is shown for illustration only . Low Profile support structure for Solar-To-Go  solar array for simple pick-and-place installation.  This galvanized steel structure can accept any solar module, of either 60 or 72 cell format(module not included). Distance between high and low side is 4 feet. Width can be adjusted up to 48-inches. Single slope positions solar modules to capture full daytime sunlight.

Single module solar support structure
Single module solar support structure

This Solar-To-Go Rack system can  expanded by adding additional sections. Additional  structures can be attached to existing sections with a slip-and-screw fitting method.

Solar-To-Go arrays joined with spice bar
Solar-To-Go Rack-2 can be joined to other Solar-to-Go structures
Legs are secured by cross beams and triangle gusset plates
Legs are secured by cross beams and triangle gusset plates
Concealed Solar Clamps
Concealed Solar Clamps

For simple assembly, SunnyCal Sola-Clamps(patent pending) can be used to mount  solar panels directly to the support legs. These optional clamps work with virtually any size solar module.

Clamps attach using self-drilling screws.

 

 

Low Profile Solar-To-Go structure can be easily moved by two persons.
Low Profile Solar-To-Go structure can be easily moved by two persons.

Rack can be protected against wind uplift and theft by use of SunnyCal Ground Screws. A simple impact tool can provide more than 300lbs of hold-down strength.

Solar Ground Screw
Optional Ground Screws Secure Against Uplift

The sections can be held in place by SunnyCal ground screws for rapid installation.

Ballast block for Solar-to-go
Ballast block for Solar-to-go

Alternatively, cinder blocks can be used as ballast to prevent wind uplift.

Shipping Container Leg Foundation
Shipping Container Leg Foundation for GroundRack

Rack can be bolted directly to shipping container rooftop edges using  the standard triangle plates.

 

Solar is made simple by:

  • Rack can be preassembled for will-call (sections can be transported using normal pickup or trailer).   Segments can be shortened for shipping; splices are provided for insertion during assembly.
  • Can be specified to have leg foundations for  surface resting  or shipping container attachment
  • Hold down can by ballast blocks, rebar-nails, concrete attachment or ground screws
  • System can be expanded by adding additional sections, joined together by link tubes
  • Engineering calculations available(optional)
  • Optional Home-Grid inverter can be included.  Inverters can offset 1000w of household load (assuming 550W modules)

Select in-store pickup at checkout and call if delivery is required.

Additional information

Weight 60 lbs
Dimensions 48 × 48 × 24 in

You may also like…

Anchor, Ground Screw, 18″

$54.99

Clamp Bracket, 2″ square tube using 18″ Ground Screw

$22.50