Description
Solar-To-Go single-module solar support for simple pick-and-place installation. Expansion Kit is available to adding additional solar modules.
Structure can support modules of any dimension and any thickness. This galvanized steel structure can accept any solar module, of either 60 or 72 cell format(module not included). Distance between high and low side is 4 feet. Width can be adjusted up to 48-inches. Single slope positions solar modules to capture full daytime sunlight.
Components are screwed together by use of standard user supplied battery-powered impact gun and standard nut-driver tip.
This Solar-To-Go Rack system can expanded by adding additional sections. Additional structures can be attached to existing sections with a slip-and-screw fitting method. Below is image of a Single Module Support and one additional Expansion Kit (modules are for illustration and are not included)
For simple assembly, SunnyCal Sola-Clamps(patent pending) can be used to mount solar panels directly to the support legs. These optional clamps work with virtually any size solar module.
Clamps attach using self-drilling screws.
Rack can be protected against wind uplift and theft by use of SunnyCal Ground Screws. A simple impact tool can provide more than 300lbs of hold-down strength.
The sections can be held in place by SunnyCal ground screws for rapid installation.
Alternatively, cinder blocks can be used as ballast to prevent wind uplift.
Solar is made simple by:
- Rack can be preassembled for will-call (sections can be transported using normal pickup or trailer). Segments can be shortened for shipping; splices are provided for insertion during assembly.
- Hold down can by ballast blocks, rebar-nails, concrete attachment or ground screws
- System can be expanded by adding additional sections, joined together by link tubes
- Engineering calculations available(optional)
- Optional Home-Grid inverter can be included. Inverters can offset up to 2000w of household load (assuming 550W modules)
Select in-store pickup at checkout and call if delivery is required.
This is a support structure only, optional module is shown for illustration only .
