Description

This is a support kit is used to expand an existing single module structure. Each Expansion kit  enables adding one more  solar module.

Low Profile expansion structure for Solar-To-Go  solar array for simple pick-and-place installation. Structure can support  modules of any dimension and any thickness.  This galvanized steel structure can accept any solar module, of either 60 or 72 cell format(module not included). Distance between high and low side is 4 feet. Width can be adjusted up to 48-inches.

Components are screwed together by use of standard battery-powered user-supplied impact gun and standard nut-driver tip.

Single module expansion can be joined to existing Single Module Support.

Solar-to-go expansion kit for adding additional solar modules
Solar-to-go expansion kit for adding additional solar modules

 

 

This Solar-To-Go Rack  expanded by adding additional Expansion Kits. Additional  structures can be attached to existing sections with a slip-and-screw fitting method.

Solar-to-go first module support kit
Single module support  for solar-to-go
Legs are secured by cross beams and triangle gusset plates
Legs are secured by cross beams and triangle gusset plates
Concealed Solar Clamps
Concealed Solar Clamps

For simple assembly, SunnyCal Sola-Clamps(patent pending) can be used to mount  solar panels directly to the support legs. These optional clamps work with virtually any size solar module.

Clamps attach using self-drilling screws.

 

 

Low Profile Solar-To-Go structure can be easily moved by two persons.
Low Profile Solar-To-Go structure can be easily moved by two persons.

Rack can be protected against wind uplift and theft by use of SunnyCal Ground Screws. A simple impact tool can provide more than 300lbs of hold-down strength.

Solar Ground Screw
Optional Ground Screws Secure Against Uplift

The sections can be held in place by SunnyCal ground screws for rapid installation.

Ballast block for Solar-to-go
Ballast block for Solar-to-go

Alternatively, cinder blocks can be used as ballast to prevent wind uplift.

Rack can be bolted directly to shipping container rooftop edges using  the standard triangle plates.

 

Solar is made simple by:

  • Rack can be preassembled for will-call (sections can be transported using normal pickup or trailer).   Segments can be shortened for shipping; splices are provided for insertion during assembly.
  • Can be specified to have leg foundations for  surface resting  or shipping container attachment
  • Hold down can by ballast blocks, rebar-nails, concrete attachment or ground screws
  • System can be expanded by adding additional sections, joined together by link tubes
  • Engineering calculations available(optional)

Select in-store pickup at checkout and call if delivery is required.

Additional information

Weight 40 lbs
Dimensions 48 × 48 × 12 in

You may also like…

Clamp Bracket, 2″ square tube using 18″ Ground Screw

$22.50

Anchor, Ground Screw, 18″

$54.99
Universal Solar Clamp, One Size Fits All

Sola-Clamp, single rail-free module clamp for flat surface mounting

$14.99