Description

Solar-To-Go single-module solar support for simple pick-and-place installation. Expansion Kit is available to adding additional solar modules.

Structure can support  modules of any dimension and any thickness.  This galvanized steel structure can accept any solar module, of either 60 or 72 cell format(module not included). Distance between high and low side is 4 feet. Width can be adjusted up to 48-inches. Single slope positions solar modules to capture full daytime sunlight.

Components are screwed together by use of standard user supplied battery-powered  impact gun and standard nut-driver tip.

Solar-to-go first module support kit
First module kit for solar-to-go

 

This Solar-To-Go Rack system can  expanded by adding additional sections. Additional  structures can be attached to existing sections with a slip-and-screw fitting method. Below is image of a Single Module Support and one additional Expansion Kit (modules are for illustration and are not included)

Two panel support structure
Two panel support structure
Legs are secured by cross beams and triangle gusset plates
Legs are secured by cross beams and triangle gusset plates
Concealed Solar Clamps
Concealed Solar Clamps

For simple assembly, SunnyCal Sola-Clamps(patent pending) can be used to mount  solar panels directly to the support legs. These optional clamps work with virtually any size solar module.

Clamps attach using self-drilling screws.

 

 

Low Profile Solar-To-Go structure can be easily moved by two persons.
Low Profile Solar-To-Go structure can be easily moved by two persons.

Rack can be protected against wind uplift and theft by use of SunnyCal Ground Screws. A simple impact tool can provide more than 300lbs of hold-down strength.

Solar Ground Screw
Optional Ground Screws Secure Against Uplift

The sections can be held in place by SunnyCal ground screws for rapid installation.

Ballast block for Solar-to-go
Ballast block for Solar-to-go

Alternatively, cinder blocks can be used as ballast to prevent wind uplift.

 

 

Solar is made simple by:

  • Rack can be preassembled for will-call (sections can be transported using normal pickup or trailer).   Segments can be shortened for shipping; splices are provided for insertion during assembly.
  • Hold down can by ballast blocks, rebar-nails, concrete attachment or ground screws
  • System can be expanded by adding additional sections, joined together by link tubes
  • Engineering calculations available(optional)
  • Optional Home-Grid inverter can be included.  Inverters can offset up to 2000w of household load (assuming 550W modules)

Select in-store pickup at checkout and call if delivery is required.

This is a support structure only, optional module  is shown for illustration only .

Additional information

Weight 40 lbs
Dimensions 48 × 48 × 12 in

You may also like…

Solar-to-go expansion kit for adding additional solar modules

Low Cost Solar Single Module Expansion Kit

$160.00

Clamp Bracket, 2″ square tube using 18″ Ground Screw

$22.50