Description
This is a support structure only, optional module is shown for illustration only . Low Profile support structure for Solar-To-Go solar array for simple pick-and-place installation. Structure can support modules of any dimension and any thickness. This galvanized steel structure can accept any solar module, of either 60 or 72 cell format(module not included). Distance between high and low side is 4 feet. Width can be adjusted up to 48-inches. Single slope positions solar modules to capture full daytime sunlight.
![Solar-to-go first module support kit](https://sunnycalsolar.com/wp-content/uploads/2024/07/STG-First-Module-Kit.jpg)
This Solar-To-Go Rack system can expanded by adding additional sections. Additional structures can be attached to existing sections with a slip-and-screw fitting method.
![Solar-To-Go arrays joined with spice bar](https://sunnycalsolar.com/wp-content/uploads/2021/08/GroundRack-with-Splice-2a-1.jpg)
![Legs are secured by cross beams and triangle gusset plates](https://sunnycalsolar.com/wp-content/uploads/2024/06/Triangle-Plates-1a-1024x326.jpg)
![Concealed Solar Clamps](https://sunnycalsolar.com/wp-content/uploads/2024/06/Concealed-Clamps-1a-292x300.jpg)
For simple assembly, SunnyCal Sola-Clamps(patent pending) can be used to mount solar panels directly to the support legs. These optional clamps work with virtually any size solar module.
Clamps attach using self-drilling screws.
![Low Profile Solar-To-Go structure can be easily moved by two persons.](https://sunnycalsolar.com/wp-content/uploads/2024/06/Walking-with-41-300x207.jpg)
Rack can be protected against wind uplift and theft by use of SunnyCal Ground Screws. A simple impact tool can provide more than 300lbs of hold-down strength.
![Solar Ground Screw](https://sunnycalsolar.com/wp-content/uploads/2018/06/1822-Gnd-Screws-1b-horiz.jpg)
The sections can be held in place by SunnyCal ground screws for rapid installation.
![Ballast block for Solar-to-go](https://sunnycalsolar.com/wp-content/uploads/2024/06/Ballast-block-1a-300x255.jpg)
Alternatively, cinder blocks can be used as ballast to prevent wind uplift.
![Shipping Container Leg Foundation](https://sunnycalsolar.com/wp-content/uploads/2021/08/Container-Leg-Foundation-1a--300x295.png)
Rack can be bolted directly to shipping container rooftop edges using the standard triangle plates.
Solar is made simple by:
- Rack can be preassembled for will-call (sections can be transported using normal pickup or trailer). Segments can be shortened for shipping; splices are provided for insertion during assembly.
- Can be specified to have leg foundations for surface resting or shipping container attachment
- Hold down can by ballast blocks, rebar-nails, concrete attachment or ground screws
- System can be expanded by adding additional sections, joined together by link tubes
- Engineering calculations available(optional)
- Optional Home-Grid inverter can be included. Inverters can offset 1000w of household load (assuming 550W modules)
Select in-store pickup at checkout and call if delivery is required.