Description
This is a support structure only. Tall support structure for Solar-To-Go solar array for simple pick-and-place installation. This system can accept up to 90inches of solar modules, of either 60 or 72 cell format(modules not included).
Modules can be attached directly to the steel supports using SunnyCal’s exclusive Sola-Clamps. Alternatively, supports can hold solar rails placed perpendicular to the support legs.
Distance between leg foundations is 8 feet. This single slope support is optimal for optimal south-facing position.
The left-right spacing can be adjusted to accommodate various solar modules dimensions.
![4 panel single direction solar-to-go](https://sunnycalsolar.com/wp-content/uploads/2024/06/4-tall-single-slope-Side-View.jpg)
This Solar-To-Go Rack system can expanded by adding additional sections. Additional structures can be attached to existing sections with a slip-and-screw fitting method.
![Solar-To-Go arrays joined with spice bar](https://sunnycalsolar.com/wp-content/uploads/2021/08/GroundRack-with-Splice-2a-1.jpg)
Rack can be protected against wind uplift and theft by use of SunnyCal Ground Screws. A simple impact tool can provide more than 300lbs of hold-down strength.
![Solar Ground Screw](https://sunnycalsolar.com/wp-content/uploads/2018/06/1822-Gnd-Screws-1b-horiz.jpg)
The sections can be held in place by SunnyCal ground screws for rapid installation.
![Shipping Container Leg Foundation](https://sunnycalsolar.com/wp-content/uploads/2021/08/Container-Leg-Foundation-1a--300x295.png)
Rack can be bolted directly to shipping container rooftop edges using angle leg foundations (specified at with order.)
Solar is made simple by:
- Rack can be preassembled for will call, or bundled in shortened format for shipping. (Sections can be transported using normal pickup or trailer)
- Can be specified to have leg foundations for surface resting or shipping container attachment
- Hold down can by ballasted weights, rebar-nails, concrete attachment or ground screws
- System can be expanded by adding additional sections, joined together by link tubes
- Engineering calculations available(optional)
- Optional clamps are available to match user’s solar panels.
- Optional Home-Grid inverter can be included. Inverters can offset 2000W of household load (assuming 550W modules)
![4 input 2kW Home Grid Inverter](https://sunnycalsolar.com/wp-content/uploads/2024/06/4input-microinverter-300x225.png)
Note, if home consumption is less than solar generation, local utility may require net metering program due to excess energy back feed to utility.
Select in-store pickup at checkout and call if delivery is required.